| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Warranty: | One Year |
|
Still deciding? Get samples of US$ 89.98/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
FRP/GRP molded septic tank is an ideal tank for toilet drainage when there is no sewage treatment system and construction chain. 0.5m³-2.5m³ septic tank is suitable for toilet drainage and multi-family houses. Larger septic tanks will be used in urban residential areas, rural areas, supermarkets, hotels, etc.
SMC septic tank structure:
The three-chamber septic tank consists of three connected tanks. The volume ratio of each tank is 2:1:3 in principle. The two middle ones are connected by fecal pipes. Anaerobic fermentation is mainly used, and the middle layer is feces and parasite eggs. The mixed liquid with a specific gravity greater than the general specific gravity uses the principle of easy precipitation to make the feces in the pool ferment and decompose after 30 days. The feces in the middle layer flows from pool 1 to pool 3 to achieve the purpose of precipitation and killing feces. The purpose of eliminating pathogenic factors is to turn the feces in the three pools into harmless high-quality ecological farmyard manure, and the feces in the three pools into harmless high-quality ecological farmyard manure.
Compared with plastic and concrete materials, it is more durable and has better long-term use effect, especially good waterproof performance, because concrete is not waterproof, and resin is an impermeable material component. Compared with plastic, molded septic tanks are truly worth the money, because resin fiberglass will not bend and will withstand groundwater pressure much better than the base.
|
NO.
|
NAME
|
Outer diameter (D*L mm)
|
Inside dimension (D*L mm)
|
Volume(m3)
|
Thickness(mm)
|
Weight(kg)
|
|
1
|
Mould-ed
septic tank |
796*1298
|
730*1232
|
0.5
|
3.2
|
32
|
|
2
|
910*1620
|
844*1554
|
0.9
|
3.3
|
43
|
|
|
3
|
1015*1735
|
900*1635
|
1
|
4
|
52
|
|
|
4
|
1160*1690
|
1100*1630
|
1.5
|
4.5
|
70
|
|
|
5
|
1266*1966
|
1186*1886
|
2
|
5
|
90
|
|
|
6
|
1266*1966
|
1186*1886
|
2
|
7
|
134
|
|
|
7
|
1266*2266
|
1186*2186
|
2.5
|
7
|
155
|
1.Industrial Water Treatment with multi-layer media
2.Water Softening
Superior material performance
Corrosion resistance: Glass reinforced plastic septic tanks have excellent corrosion resistance to various gas and liquid media such as acid, alkali, organic solvents, and salts. They can be economically selected to use ortho benzene, meta benzene, and vinyl resins as matrix materials according to actual usage requirements
Lightweight and High Strength: Its density is not greater than 2, only 1/4 of steel and 2/3 of aluminum, but its strength is 10 times that of rigid polyvinyl chloride, and its absolute strength exceeds the level of aluminum and ordinary steel
Aging resistance: Long service life, which can reach over 50 years under normal circumstances, and some can even exceed 70 years
Flame retardant: The flame propagation rate of ordinary flame retardant septic tanks shall not exceed 25, and the flame propagation rate of advanced flame retardant vinyl septic tanks shall not exceed 10, with an oxygen index of not less than 28
High safety: with excellent electrical insulation and no breakdown at 10kV voltage; Non electromagnetic, suitable for use on magnetic sensitive devices; Its special structure also has characteristics such as anti slip and anti fatigue
Product design and functional advantages
Good sealing: Integrated manufacturing, no leakage, can effectively prevent sewage leakage from polluting surface water, soil, etc., avoiding a series of problems caused by underground leakage in brick and concrete structured septic tanks, such as wet and soft foundation sinking, and endangering surrounding buildings
Efficient treatment of sewage: The tank is equipped with partitions, fillers, etc. inside, which can divide the tank into multiple parts, such as a third stage anaerobic chamber, a second stage anaerobic chamber, and a clarification chamber. By circulating water and other methods, the mixing and retention time of sewage can be increased, and the contact oxidation time between sewage and fillers can be longer, resulting in a higher degree of organic matter biodegradation and efficient treatment of feces. The anaerobic decay effect is more than twice that of traditional septic tanks
Small footprint: Small size, large effective volume, saving land excavation area, flexible site selection, can effectively improve the utilization rate of land resources, especially suitable for urban areas where land is precious and land resources are limited
Economic cost advantage
Low manufacturing cost: Adopting factory based, mechanized, batch based, and integrated production methods, the production process is relatively simple and the production cost is relatively low
Low installation cost: lightweight and high-strength, weighing only about one-third of the same volume of concrete septic tank, easy to transport and install, can greatly shorten the construction period, reduce labor costs and construction time, improve construction efficiency, and thereby reduce installation costs
Low maintenance cost: no post management, long slag cleaning cycle, buried type, no power, no need for excessive maintenance and management in the later stage, reducing post investment
Hebei Richange FRP Products Co., Ltd. was established in August 2013 and is located at Weisan Road, High-tech Development Zone, Jizhou District, Hengshui City. It is a technology-based enterprise integrating product research and development, design, production, sales, installation and after-sales service. . The company has advanced equipment and a mature technical team. It has undertaken many key projects across the country and is a domestic company specializing in environmental protection equipment. Main products: bwfrp cable protection pipe with( braided, winding and pultruded processes), integrated pump station, FRP cable bracket, FRP molded series products, PVC - FRP, P P- FRP, P V D F -FRP, carbon steel, stainless steel and other composite FRP containers, It is a comprehensive enterprise integrating the production, sales and maintenance of towers, pipes and other series of products. The company currently has 10 (braided, wound and pultruded) pipe production lines. There are 12 tank spray lining production lines, 2 tank winding production lines, 1 integrated pump station production line, and 2 large molding machines. There are 3 small molding machines and 3 sheet production lines.
1. Are you a manufacturer?
Yes, we are a manufacturer, welcome to visit our factory!
2. What's FRP?
Fiber Reinforced Polymer (FRP) is a composite material made of a polymer matrix reinforced with fibers. The fibres are
usually glass, carbon, aramid, or basalt. Rarely, other fibres such as paper or wood or asbestos have been used. The polymer is
usually an epoxy, vinylester or polyester thermosetting plastic, and formaldehyde resins are still in use. FRPs are
commonly used in the aerospace, automotive, marine, construction industries and ballistic armor.
3.How can you guarantee you product quality?
100% of our products will be tested before delivery. To control quality, we are using high quality material from high
quality supplier.
){kind=link}